|    |  			 PT-RZ120/RZ120L |  		
|  Projector type |  			 1-Chip DLP™ projector |  		
|  DLP™ chip |  			   |  		
|  Panel size |  			 17.0 mm (0.67 in) diagonal (16:10 aspect ratio) |  		
|  Display system |  			 DLP™ chip x 1, DLP projection system |  		
|  Number of pixels |  			 2,304,000 (1920 x 1200) x 1 |  		
|  Light source |  			 Laser Diode |  		
|  Light output |  			 12,000 lm*1 / 12,600 lm (Center)*2 |  		
|  Time until light output declines to 50 %*3 |  			 20,000 hours (NORMAL)/24,000 hours (ECO) |  		
|  Resolution |  			 1920 x 1200 pixels |  		
|  Contrast*1 |  			 10,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3) |  		
|  Screen size (diagonal) |  			 1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 16:10 aspect ratio |  		
|  Center-to-corner uniformity*1 |  			 90% |  		
|  Lens |  			 PT-RZ120: Powered zoom (throw ratio 1.7–2.4:1), powered focus F 1.7–1.9, f 25.6–35.7 mm |  		
|  PT-RZ120L: Optional powered zoom/focus lenses |  		
|  Lens shift*4 |  			   |  		
|  Vertical |  			 +50 %, -16 % (+40%, -16% with ET-DLE060) (powered) |  		
|  (from center of screen) |  		
|  Horizontal |  			 +30 %, -10 % (+19%, -10% with ET-DLE060 / +28 %, -10 % with ET-DLE085/ET-DLE105 ) (powered) |  		
|  (from center of screen) |  		
|  Keystone correction range |  			 Vertical: ±40° (±16° with ET-DLE060, ±22° with ET-DLE105/ET-DLE085/ET-DLE055, +5° with ET-DLE035), |  		
|  Horizontal: ±15° (±10° with ET-DLE060) (cannot be operated with ET-DLE035) |  		
|  Keystone correction range with optional |  			 Vertical: ±45° (±16° with ET-DLE060, ±40° with ET-DLE150/ET-DLE250/supplied lens, ±22° with ET-DLE105/ET-DLE085/ET-DLE055), |  		
|  ET-UK20 Upgrade Kit |  			 Horizontal: ±40° (±10° with ET-DLE060, ±15° with ET-DLE105/ET-DLE085/ET-DLE055) |  		
|    |  			 When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55°. |  		
|  Installation |  			 Horizontal/vertical, free 360-degree installation |  		
|  Terminals |  			   |  		
|  SDI IN |  			 BNC x 1: 3G/HD/SD-SDI input |  		
|  HDMI IN |  			 HDMI 19-pin x 1 (Compatible with HDCP 2.2, Deep Color, 4K signal input) |  		
|  DVI-D IN |  			 DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) |  		
|  RGB 1 IN |  			 RGB x 1 (BNC x 5): RGB/YPBPR/YCBCR |  		
|  RGB 2 IN |  			 D-sub HD 15-pin (female) x 1: RGB/YPBPR/YCBCR |  		
|  SERIAL/MULTI-PROJECTOR SYNC IN |  			 D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |  		
|  SERIAL/MULTI-PROJECTOR SYNC OUT |  			 D-sub 9-pin (male) x 1 for link control |  		
|  REMOTE 1 IN |  			 M3 x 1 for wired remote control |  		
|  REMOTE 1 OUT |  			 M3 x 1 for link control (for wired remote control) |  		
|  REMOTE 2 IN |  			 D-sub 9-pin (female) x 1 for external control (parallel) |  		
|  LAN |  			 RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net) |  		
|  DIGITAL LINK/LAN |  			 RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.2, Deep Color, 4K signal input) |  		
|  Power supply |  			 AC 100–240 V, 50/60 Hz |  		
|  Power consumption |  			 1,100 W |  		
|  Cabinet materials |  			 Molded plastic |  		
|  Operation noise*1 |  			 44 dB (Normal)/41 dB (Quiet1)/38 dB (Quiet2) |  		
|  Dimensions (W x H x D) |  			 PT-RZ120: 498 x 36 Месяц Япония |